ChimneySaver CrownSaver

CrownSaver is our original crown repair product, developed in the early 80’s. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent.

Product Features:

10 Year Warranty

Strong cement-based, long term repair

Waterproof barrier

Easy Application

Ready To Use

For best results, cover the crown with FormFoil, a sticky, rubber backed, aluminum foil flashing (sold separately in 9”x 50’ rolls). Then, simply mix one scoop CrownSaver (measuring scoop included) with three scoops fine mason’s sand and water. Next trowel over the crown at about 1/2” thickness (¼”min.-2”max). Because CrownSaver is a cement-based coating, a ½” bead of caulk should be applied to the base of each flue tile to allow for expansion.

Technical Information:

Coverage Rate: 30 sq. ft. per 5 gallons at 1/2" thickness

Available Sizes: 5 gallon pails

Application Temperatures: 40° F minimum

Application Method: Trowel, masonry finish brush

Dry Time: 4-6 hours (above 40° F).

Cleanup: Remove excess CrownSaver with a stiff nylon scrub brush and water before hardening occurs